Hi,
I have a Kuka KR60 with the KRC4 controller, the robot is new and i am having a few issues programming in I/O's.We have had John from JC Automation come to our work and commision the robot for use which included integrating a turntable, spit roast and torch cleaner, all the work he has done has worked and can all be easily controlled by the KRC4 The problem i am having is calling the I/O's in to action in a programme format say i wanted to activate output 18 (Travel Lock bolt Up/Down) i have used commad line $OUT[18] = TRUE, but when i block select this and hit run nothing happens where as if i go into the actual I/O list and select output 18 and hit the value button the bolt lifts up then drops back down when i hit value again. Can anyone help me me by telling me what i am missing/doing wrong? I have been in contact with Mike from Kuka who told me about using $OUT[18] = TRUE but he is currently unavailable to help me furtherat the moment.
Please help.
I didn't find the right solution from the Internet.
References:-
https://www.robot-forum.com/robotforum/ ... 569aursg43
Small Business Marketing Examples
Thanks
inserting and I/O operation into a programme
Forum robot kuka.
-
- Apprend le binaire
- Messages : 5
- Enregistré le : 03 févr. 2018, 07:52
Aller à
- Automatisme industriel
- ↳ Siemens
- ↳ Schneider - Telemecanique
- ↳ Allen Bradley
- ↳ Wago - Codesys
- ↳ Mitsubishi Electric
- ↳ Omron
- ↳ Les autres : B&R, Beckhoff, Phoenix Contact etc..
- Robotique
- ↳ Kuka
- ↳ ABB
- ↳ Fanuc
- ↳ Motoman
- ↳ Les autres: Epson Robotique...
- Informatique industrielle
- ↳ Interface Homme Machine
- ↳ Supervision industrielle
- ↳ Section hard
- ↳ Section soft
- ↳ Réseaux
- Instrumentation industrielle
- ↳ Mesures
- ↳ Regulation - Enregistrement - Acquisition
- ↳ Electronique
- ↳ Vision industrielle
- Electrotechnique
- ↳ Electricité
- ↳ Variateurs de vitesse
- Sécurité machine
- ↳ Conception / Architecture / Mise en oeuvre
- ↳ Normes applicables
- Entraide
- ↳ Professionnel - Sous traitance et autre...
- ↳ Etudiants - Exercices et avis...
- La bibliothèque de l'automaticien
- ↳ Livres - Documents
- ↳ Tutoriaux
- ↳ Siemens
- ↳ Schneider
- ↳ Démo - Utilitaires- Applications
- ↳ Liens pédagogiques
- ↳ Nos ami(e)s les automaticien(ne)s
- Le marché de l'emploi
- ↳ Offres d'emploi
- ↳ Demandes d'emploi
- La vie du forum
- ↳ Présentation
- ↳ Parlez de tout
- ↳ News - Questions - Suggestions
- ↳ Corbeille