Communication automate Schneider / robot Fanuc

Partie du forum pour tout ce qui concerne la partie réseau de communication dans l'industrie. Forum, conseil, astuce et entraide sur le réseau industriel tel que la connexion modbus, ethernet, fipio .
mathias39
Code son premier grafcet
Code son premier grafcet
Messages : 37
Inscription : 14 mai 2019, 10:20

Communication automate Schneider / robot Fanuc

Message par mathias39 »

Bonjour tout le monde,
Je suis actuellement en stage et l'objectif de mon stage est de créer la communication entre un automate Schneider et un robot Fanuc sur Unity pro.
La communication entre ces deux entités existe de façon native sur Proface. Je dois en quelque sorte recréer cette communication mais sur le logiciel Unity pro.
Si quelqu'un a des pistes pour m'orienter ...
Merci d'avance
Avatar de l’utilisateur
itasoft
Mi homme - Mi automate
Mi homme - Mi automate
Messages : 7037
Inscription : 20 oct. 2015, 10:15
Localisation : Lyon
Contact :

Re: Communication automate Schneider / robot Fanuc

Message par itasoft »

slts,
sous quel protocole ?
Automaticien privé (de tout)
itasoft@free.fr
mathias39
Code son premier grafcet
Code son premier grafcet
Messages : 37
Inscription : 14 mai 2019, 10:20

Re: Communication automate Schneider / robot Fanuc

Message par mathias39 »

Ethernet TCP.
Merci de ta réponse
Avatar de l’utilisateur
itasoft
Mi homme - Mi automate
Mi homme - Mi automate
Messages : 7037
Inscription : 20 oct. 2015, 10:15
Localisation : Lyon
Contact :

Re: Communication automate Schneider / robot Fanuc

Message par itasoft »

slts,
sur quel automate ?
Automaticien privé (de tout)
itasoft@free.fr
mathias39
Code son premier grafcet
Code son premier grafcet
Messages : 37
Inscription : 14 mai 2019, 10:20

Re: Communication automate Schneider / robot Fanuc

Message par mathias39 »

Schneider M340
Avatar de l’utilisateur
itasoft
Mi homme - Mi automate
Mi homme - Mi automate
Messages : 7037
Inscription : 20 oct. 2015, 10:15
Localisation : Lyon
Contact :

Re: Communication automate Schneider / robot Fanuc

Message par itasoft »

slts,
il faut un module BMX NOE xxxxx
Automaticien privé (de tout)
itasoft@free.fr
mathias39
Code son premier grafcet
Code son premier grafcet
Messages : 37
Inscription : 14 mai 2019, 10:20

Re: Communication automate Schneider / robot Fanuc

Message par mathias39 »

D'accord merci, et une fois que je l'ai comment faire pour établir une connexion avec mon robot et lire certains registres et écrire sur certaines entrées ?
Avatar de l’utilisateur
itasoft
Mi homme - Mi automate
Mi homme - Mi automate
Messages : 7037
Inscription : 20 oct. 2015, 10:15
Localisation : Lyon
Contact :

Re: Communication automate Schneider / robot Fanuc

Message par itasoft »

slts,
avec les requêtes READ_VAR et WRITE_VAR voir l'aide en ligne sur Unity Pro
Automaticien privé (de tout)
itasoft@free.fr
mathias39
Code son premier grafcet
Code son premier grafcet
Messages : 37
Inscription : 14 mai 2019, 10:20

Re: Communication automate Schneider / robot Fanuc

Message par mathias39 »

D'accord merci beaucoup mais je suis loin d'être un expert est-il possible d'avoir un tout petit de détails concernant les étapes à suivre ?
Répondre